75Ω Unit

The functionof HM-HK01 aviation type GPS antenna isto receive the GPSL1 satellite signal, with excellent quality and performance, it is widely used in the field of aviation, aerospace, chariot and warship etc. Technical Specification: Receiving frequency 1575.42±10MHz Working current ≤30mA Peak gain 30±3dB Working temperature -55 ~+85 celsius degree Band width ≤250MHZ@30dB Storage temperature -55~+100 celsius degree V.S.W.R. ≤1.5:1 Quake-proof According to MIL-STD-810F 514.5 Noise figure ≤1.5dB Anti- salt fog According to MIL-STD-810F 509.4 Input impedance 50Ω Waterproof IEC 60529 IPX7 Polarization type Right rotation polarization Cable length 5—50m option(SYV-50-3-1) Working voltage 5V±0.5VDC mounting 4pcs head-sunk bolt fixation Model, outside dimension, applicable connector and cable chart: Model Dimension(mm) Applicable connector Applicable cable HM-HK01 120*80*18mm(excluding connector) Antenna with TNC (K female) SYV-50-3-1 cable with TNC(J male) We also have other kind of GPS Antenna, please check Outdoor GPS Antenna, Vehicle GPS Antenna. Need more information, please Contact us.

Product function GPS timing synchronization survey antenna are used in the field of measurement, base station, laboratory, controlling tower etc that nee d high ability of receiving GPS signal and good performance. Feature: High ability of receiving GPS signal, wide application. Peak gain of signal, cable length and connector type are subject to customer’s choice. Technical Specification: Receive frequency GPS L1(C/A) or +GPS L2 or +Glonass(L1,L2) Working voltage 3VDC,5VDC,3~12)VDC option Peak gain ≥32dB option Working current Typical 35mA Input impedance 50Ω Working temperature -40~+65 celsius degree Polarization type Right Polarization Storage temperature -55~+85 celsius degree V.S.W.R. ≤1.5:1 Cable length 5—100m option(SYV-50-3-1) Noise figure ≤1.5dB mounting Tripod fixation or others Model, outside dimension, applicable connector and cable chart: Model Dimension(mm) Applicable connector Applicable cable HM-CL01-1 φ98×145mm BNC(J male) SYV-50-3-1 HM-CL01-2 φ98×145mm TNC (J male) SYV-50-3-1 HM-CL01-3 Φ180×60mm Antenna with BNC(K female) SYV-50-5-1 cable with BNC(J male) HM-CL01-4 Φ180×60mm Antenna with TNC(K female) SYV-50-5-1 cable with TNC(J male) We also have other kind of GPS Antenna, please check Outdoor GPS Antenna, Vehicle GPS Antenna. Need more information, please Contact us.

Function The function of HM-SW series outdoor GPS antenna is to receive GPS satellite signal, and pass them to GPS receiver or GPS OEM board by cable. Feature: The product is qualified to work at high-dynamic and rigorous-temperature environment, widely used in the automobile, train, chariot, warship and base station etc. with anti-salt spray, anti-erode, water-proof, anti-vibration and snow-preventing accumulation Cable type and length are subject to customer’s choice. Technical Specification: Receive frenqucence GPS L1,1575.42±10MHz Working current ≤25mA Band width ≤250MH Working temperature -55~+85 celsius degree Peak gain 30±3dB Storage temperature -55~+100 celsius degree Input impedance 50Ω Cable length 5—50m option(SYV-50-3-1) Polarization type Right polarization mounting 4pcs head-sunk bolt fixation V.S.W.R. ≤1.5:1 Noise figure ≤1.5dB Working voltage 3V/5V DC Model, outside dimension,applicable connector and cable chart: Model Dimension(mm) Applicable connector Applicable cable HM-SW01-1 φ98×145mm BNC(J male) SYV-50-3-1 HM-SW01-2 φ98×145mm TNC(J male) SYV-50-3-1 HM-SW02-1 Φ100×123mm Antenna with N (K female) SYV-50-3-1 We also have other kind of GPS Antenna, please check Aviation Type GPS Antenna, Vehicle GPS Antenna. Need more information, please Contact us.

Function The function of HM-HH GPS marine Antenna for Navigation is to receive GPS satellite signal, pass them to GPS receiver or GPS OEM board by cable. To be used in marine vessel or train, chariot, car or base station etc. Feature Excellent adaptability for environment temperature Good anti-salt spray Water-proof Snow-preventing accumulation. Technical Specification: Receive frequency GPS L1,1575.42±10MHz Working voltage 3V/5V DC Antenna gain ≥3dB Working current 25mA Amplifier gain ≥37dB Working temperature -45~+85 celsius degree Polarization type right Polarization Storage temperature -50~+90 celcius degree Selectivity ≥25dB(f0±100MHz) Cable length 5—10m option(SYV-50-3-1) Noise figure ≤1.5dB mounting M24×1.5 thread fixation Model, outside dimension,applicable connector and cable chart: Model Dimension(mm) Applicable connector Applicable cable HM-HK01 120×80×18mm(excluding connector ) Antenna with TNC(K female) SYV-50-3-1 cable with TNC(J male) We also have other kind of GPS Antenna, please check Aviation Type GPS Antenna, Outdoor GPS Antenna. Need more information, please Contact us.

Function To be used to receive GPS satellite signal mounted at car and various vehicle, also at mobile or static station. Feature Full-direction GPS antenna, compact size, light-weight, easy-carry, ease installation, magnetic-absorbing mounting, can be attached on any iron-made object. Technical Specification: Receive frequency GPS L11575.42+10MHz Working voltage 3V/5V DC,(3~12)VDC option Amplifier gain ≥27dB Working current 20mA Input impedance 50Ω Working temperature -45~+85 celsius degree Polarization type Right Polarization Storage temperature -55~+90 celsius degree Selectivity ≥200dB(f0+-100MHz) Cable length 2-5m option(SYV-50-3-1) Noise figure ≤1.5dB mounting Tripod fixation or others Model, outside dimension,applicable connector and cable chart: Model Dimension(mm) Applicable connector Applicable cable HM-CL01-1 φ98×145mm BNC(J male) SYV-50-3-1 HM-CL01-2 φ98×145mm TNC (J male) SYV-50-3-1 HM-CL01-3 Φ180×60mm Antenna with BNC (K female) SYV-50-5-1 cable with(J male) HM-CL01-4 Φ180×60mm Antenna with TNC (K female) SYV-50-5-1 cable with TNC(J male) We also have other kind of GPS Antenna, please check Aviation Type GPS Antenna, Outdoor GPS Antenna. Need more information, please Contact us.

Function The HM-ZF series vehicle GPS satellite signal repeater is to transmit GPS satellite signal received by receiver mounted vehicle outside to vehicle inside, and make it easily to be received by satellite-positioning equipment (such as handset Receiving frequency GPS L1, 1575.42±10MHz gain 53+-3dB Polarization type right Polarization Mounting Magnet absorb We also have other kind of GPS Antenna, please check Aviation Type GPS Antenna, Outdoor GPS Antenna. Need more information, please Contact us.

Type Charateristics Two splitter Threesplitter Foursplitter part number HM-S02M1700/2500B1 HM-S03M1700/2500B1 HM-S04M1700/2500B1 frequency range (MHz) 1700~2500 vswr ≤1.2 Insert loss(dB) ≤3.3 ≤5.2 ≤6.4 Insolating degree( dB ) ≥20 Third order intermodulation (dBc) ≤-110 power handing(w) 50 Impedance(Ω) 50 Temperature range(℃) -30~65 Connector type N-K We also have other kind of Power splitter, Need more information, please Contact us.

Type Charateristics Twosplitter Threesplitter Foursplitter part number HM-S02M800/2500B1 HM-S03M800/2500B1 HM-S04M800/2500B1 frequency range(MHz) 800~2500 vswr ≤1.2 Insert loss(dB) ≤3.3 ≤5.3 ≤6.5 Insolating degree(dB) ≥20 Third order intermodulation (dBc) ≤-110 power handing(w) 50 Impedance(Ω) 50 Temperature range(℃) -30~65 Connector type N-K We also have other kind of Power splitter, Need more information, please Contact us.

Type Charateristics Twosplitter Threesplitter Foursplitter part number HM-S02C1700/2500B1 HM-S03C1700/2500B1 HM-S04C1700/2500B1 frequency range(MHz) 1700~2500 vswr ≤1.2 Insert loss(dB) ≤3.1 ≤5.0 ≤6.2 Isolating degree(dB) ≤-110 Third order intermodulation (dBc) 300 power handing(w) 50 Impedance(Ω) -30~65 Temperature range(℃) N-K We also have other kind of Power splitter, Need more information, please Contact us.

type Charateristics Twosplitter Threesplitter Foursplitter part number HM-S02C800/2500B1 HM-S03C800/2500B1 HM-S04C800/2500B1 frequency range(MHz) 800~2500 vswr ≤1.2 Insert loss(dB) ≤3.1 ≤5.1 ≤6.2 Insolating degree(dB) ≤-110 Third order intermodulation (dBc) 300 power handing(w) 50 Impedance(Ω) -30~65 Temperature range(℃) N-K We also have other kind of Power splitter, Need more information, please Contact us.

Type Charateristics 5dB part number HM-C05M 800/2500B1 frequency range(MHz) 800~2500 vswr ≤1.2 coupling degree(dB) 5±0.6 insert loss(Db) ≤2.05 directivity(dB) ≥20 third order intermodulation (dBc) ≤-110 power handing (w) 50 impedance(Ω) 50 temperature range(℃) -30~65 connector type N-K We also have other kind ofDirectional Coupler. Need more information, please Contact us.

Type Charateristics 5dB 6dB 7dB 10dB 15dB 20dB 30dB part number HM-C05M 800/2500B1 HM-C06M 800/2500B1 HM-C07M 800/2500B1 HM-C10M 800/2500B1 HM-C15M 800/2500B1 HM-C20M 800/2500B1 HM-C30M 800/2500B1 frequency range(MHz) 800~2500 vswr ≤1.2 coupling degree(dB) 5±0.6 6±0.6 7±0.6 10±0.8 15±0.8 20±1 30±1 insert loss(Db) ≤2.05 ≤1.65 ≤1.35 ≤0.8 ≤0.45 ≤0.35 ≤0.25 directivity(dB) ≥20 third order intermodulation (dBc) ≤-110 power handing (w) 50 impedance(Ω) 50 temperature range(℃) -30~65 connector type N-K We also have other kind ofDirectional Coupler. Need more information, please Contact us.

Type Charateristics 5dB 6dB 7dB 10dB 15dB 20dB 30dB part number HM-C05M1 700/2500B1 HM-C06M1 700/2500B1 HM-C07M1 700/2500B1 HM-C10M1 700/2500B1 HM-C15M1 700/2500B1 HM-C20M1 700/2500B1 HM-C30M1 700/2500B1 frequency range (MHz) 1700~2500 vswr ≤1.2 coupling degree(dB) 5±0.5 6±0.5 7±0.5 10±0.5 15±0.5 20±0.5 30±1 insert loss(dB) ≤2 ≤1.6 ≤1.3 ≤0.75 ≤0.45 ≤0.35 ≤0.25 directivity(dB) ≥20 third order intermodulation (dBc) ≤-110 power handing (w) 50 impedance(Ω) 50 temperature range (℃) -30~65 connector type N-K We also have other kind ofDirectional Coupler. Need more information, please Contact us.

Type Charateristics 5dB 6dB 7dB 10dB 15dB 20dB 30dB part number HM-C05S 800/2500B1 HM-C06S 800/2500B1 HM-C07S 800/2500B1 HM-C10S 800/2500B1 HM-C15S 800/2500B1 HM-C20S 800/2500B1 HM-C30S 800/2500B1 frequency range(MHz) 800~2500 vswr ≤1.2 coupling degree(dB) 5±0.6 6±0.6 7±0.6 10±0.6 15±0.6 20±0.6 30±0.8 insert loss(dB) ≤1.95 ≤1.55 ≤1.2 ≤0.7 ≤0.4 ≤0.3 ≤0.2 directivity(dB) ≥20 third order intermodulation (dBc) ≤-110 power handing(w) 100 impedance(Ω) 50 temperature range(℃) -30~65 connector type N-K We also have other kind ofDirectional Coupler. Need more information, please Contact us.

Type Charateristics 3dB Chamber bridge part number HM-C30S800/2500B2 HM-C40S800/2500B2 frequency range (MHz) 1700~2500 800-2500 vswr ≤1.2 psaaband ripple(dB) ±0.2 ±0.35 insert loss (dB) ≤0.25 ≤0.4 Isolation(dB) ≥25 ≥23 Third order intermodulation (dBc) ≤-110 power handing(w) 100 Impedance(Ω) 50 temperature range(℃) -30~65 connector type N-K

Type Charateristics GSM/3G C part number HM-G80/3G250A1 Ports GSM frequency range(MHz) 880-960 vswr ≤1.2 insert loss（dB） ≤0.5 passband ripple（dB） ≤0.3 outside band rejection（dB） ≥90@1920-2170MHz third order intermodulation（dBc） ≤-140 power handing（w） 200 impedance（Ω） 50 temperature range（℃） -30~65 connector type N-K

Type Charateristics 3G part number HM-F3G60A1 HM-F3G60A2 frequency range(MHz) 1920-1980 2110-2170 vswr ≤1.2 ≤1.2 insert loss（dB） ≤1.2 ≤1.2 passband ripple（dB） ≤0.7 ≤0.7 outside band rejection（dB） ≥80@DC-1750MHz ≥80＠DC-1750MHz ≥50@1750-1900MHz ≥50＠1750-2090MHz ≥50@2000-2170MHz ≥50＠2190-2400MHz ≥80@2170-3000MHz ≥80＠2400-3GHz third order intermodulation （dBc） ≤-136 ≤-136 power handing（w） 100 100 impedance（Ω） 50 50 temperature range（℃） -30~65 -30~65 connector type SMA-K SMA-K

Type Charateristics 3G part number HM-D3G60A1 Port RX TX frequency range(MHz) 1920-1980 2110-2170 vswr ≤1.2 insert loss（dB） ≤1.2 ≤1.2 passband ripple（dB） ≤0.6 ≤0.6 outside band rejection（dB） ≥80@DC-1750MHz ≥80@DC-1750MHz ≥50@1750-1900MHz ≥90@1750-1980MHz ≥50@2000-2110MHz ≥50@1980-2090MHz ≥90@2110-3000MHz ≥50@2190-2300MHz ≥80@2300-3000MHz Third order intermodulation(dBc) ≤-136 power handing（w） 100 impedance（Ω） 50 emperature range（℃） -30~65 connector type SMA-K

Description model frequency (MHz) VSWR Rated power （w） Temperature （℃） Input impedance（Ω） connector Outside dimension 3W round coaxial load HM-DF-3NA1 DC-6000 ≤1.06 3 -30~55 50 SMA Ø7.8×13.2 5W round coaxial load HM-DF-5NA1 DC-6000 ≤1.06 5 -30~55 50 SMA Ø25×30 10W round coaxial load HM-DF-10NA1 DC-6000 ≤1.2 10 -30~55 50 SMA Ø48×63 20W round coaxial load HM-DF-20NA1 DC-6000 ≤1.2 20 -30~55 50 SMA Ø54×67 30W round coaxial load HM-DF-30NA1 DC-6000 ≤1.2 30 -30~55 50 SMA Ø60×75 10W round coaxial load HM-DF-10NB1 DC-6000 ≤1.2 10 -30~55 50 SMA Ø 100×70×50 20W square coaxial load HM-DF-20NB1 DC-6000 ≤1.2 20 -30~55 50 SMA Ø 140×95×60 30W square coaxial load HM-DF-30NB1 DC-6000 ≤1.2 30 -30~55 50 SMA Ø 150×80×100 50W square coaxial load HM-DF-50NB1 DC-6000 ≤1.2 50 -30~55 50 SMA Ø 200×160×100

Temp.range -65~+155 Celsius degree Insulation resistance >=1000MΩ Characteristic impedance 50Ω V.S.W.R. <=1.30 Frequency range 0~6GHz Insertion loss 0.1dB at 1GHz Working voltage 170v Withstand Voltage 500v Contact resistance Center conductor ≤10mΩ Life-span 500 cycles Outer conductor ≤5mΩ

Temp.range -65~+155 celsius degree Insulation resistance >=1000MΩ Characteristic impedance 50 ohm V.S.W.R. <=1.20 Frequency range 0~6GHz Insertion loss 0.1dB at 1GHz Working voltage 250v(rms) Withstand Voltage 750V(rms) Contact resistance Center conductor ≤0.005Ω Life-span 500 cycles Temp.range -65~+155 celsius degree Insulation resistance >=1000MΩ Characteristic impedance 50 ohm V.S.W.R. <=1.20 Frequency range 0~6GHz Insertion loss 0.1dB at 1GHz Working voltage 250v(rms) Withstand Voltage 750V(rms) Contact resistance Center conductor ≤0.005Ω Life-span 500 cycles

Temp.range -55~+155 celsius degree Insulation resistance ≥1000MΩ Characteristic impedance 50ohm V.S.W.R. direct type ≤1.35 Frequency range 0~4GHz angle type ≤1.65 Working voltage 500V(rms) Withstand Voltage 700V Contact resistance Center conductor ≤5mohm Durability 500 cycle Outer conductor ≤2.5mohm

Temp.range -65~+125celsius degree Insulation resistance ≥1000Mohm Characteristic impedance 75ohm V.S.W.R. diect type ≤1.35 Frequency range 0~2GHz angle type ≤1.65 Working voltage 500V(rms) Withstand Voltage 500V Contact resistance Center conductor ≤5mohm Durability 500 cycle Outer conductor ≤7mohm

Temp.range -65~+125℃ Insulation resistance ≥5000MΩ Characteristic impedance 50Ω V.S.W.R. connected with soft cable ≤1.15+0.02F connected with semi- steel,semi- flexible cable ≤1.10+0.02F Frequency range connected with soft cable 0～12.4GHz Withstand Voltage 1000V connected with semi- steel, semi- flexible cable 0～18GHz Life-span 500 Cycle Contact resistance Center conductor ≤0.003mΩ Outer conductor ≤0.002mΩ

Dimension（mm）H*W*D Space available 2200*600*600 40U 2000*600*600 36U Remark: 1U=44.45mm Parts Height Module quantity DDF unit 3U 20 Parts Height Remark Route slot 2U The following space is needed if MDF Outside lines 200 pairs (100*2) 4.5U Total 10U Inside lines 256 pairs(128*2) 5.5U Parts Space available Fiber optic storage rack 4U Terminal rack 48 cores 3U 72 cores 5U 96 cores 6U Splicing rack 48 cores 2U 144 cores 5U Terminal & splicing rack 24 cores 3U 48 cores 5U 72 cores 8U 19’’ standard cabinet with built-in all-in-one cassettes 24 cores 2U 48 cores 4U 72 cores 6U 96 cores 8U

Feature: 1)Reeds adopt separate double-contact structure with angle. 2)Excess voltage and current protection 3)Three levels acousto-optic alarming mode 4)Modular design, flexible configuration 5)Full structure of aluminum alloy section bar, convenient for installation 6)High density and big capacity 7)All the plastic parts use flame retardant, flame retardant capability reach level FV-0 Series No Outer wire capacity (pair line) No.of column alarm per frame No. of column max pacacity per column(pair line) number of row max Capacity per row (pair line) Dimension(mm) H W D 1 1200 1 2 100x6 5 128x2 2000 500 1098 2 4000 1 5 100x8 6 128x5 2000 1250 1298 3 5000 1 5 100x10 7 128x5 2200 1250 1298 4 6000 1 5 100x12 9 128x5 2600 1250 1298

1) Industry standard 19inchhorizontal rack 2) Supports both 568A and 568B installations 3) Supports 150Mbps Ethernet 4) Exceeds TIA/EIA 568 standard 5) Termination accepts 110 punch-down tools 6) With or without wiring management 7) Base: UL94V-0 label holder 8) Connector: PC UL94V-0 9) Housing: 30% G.F PBT UL94V-0 10) Phosphor-bronze alloy material with a minimum 10 micro inches of gold-over-nickel plating 11) Insertion life: 750 cycles (minimum) 12) Maximum rated electric current: 1.5A

1) Industry standard 19" horizontal rack 2) Supports both 568A and 568B installations 3) Supports 150Mbps Ethernet 4) Exceeds TIA/EIA 568 standard 5) Termination accepts 110 punch-down tools 6) With or without wiring management 7) Base: UL94V-0 label holder 8) Connector: PC UL94V-0 9) Housing: 30% G.F PBT UL94V-0 10) Phosphor-bronze alloy material with a minimum 10 micro inches of gold-over-nickel plating 11) Insertion life: 750 cycles (minimum) 12) Maximum rated electric current: 1.5A 13) 24 port

1) Industry standard 19" horizontal rack 2) Supports both 568A and 568B installations 3) Supports 150Mbps Ethernet 4) Exceeds TIA/EIA 568 standard 5) Termination accepts 110 punch-down tools 6) With or without wiring management 7) Base: UL94V-0 label holder 8) Connector: PC UL94V-0 9) Housing: 30% G.F PBT UL94V-0 10) Phosphor-bronze alloy material with a minimum 10 micro inches ofgold-over-nickel plating 11) Insertion life: 750 cycles (minimum) 12) Maximum rated electric current: 1.5A 13) 96 port

1) Industry standard 19 " horizontal rack 2) Supports both 568A and 568B installations 3) Supports 150Mbps Ethernet 4) Exceeds TIA/EIA 568 standard 5) Termination accepts 110 punch-down tools 6) With or without wiring management 7) Base: UL94V-0 label holder 8) Connector: PC UL94V-0 9) Housing: 30% G.F PBT UL94V-0 10) Phosphor-bronze alloy material with a minimum 10 micro inches of gold-over-nickel plating 11) Insertion life: 750 cycles (minimum) 12) Maximum rated electric current: 1.5A 13) 24 port, colourful module

1) Industry standard 19" horizontal rack 2) Supports both 568A and 568B installations 3) Supports 150Mbps Ethernet 4) Exceeds TIA/EIA 568 standard 5) Termination accepts 110 punch-down tools 6) With or without wiring management 7) Base: UL94V-0 label holder 8) Connector: PC UL94V-0 9) Housing: 30% G.F PBT UL94V-0 10) Phosphor-bronze alloy material with a minimum 10 micro inches ofgold-over-nickel plating 11) Insertion life: 750 cycles (minimum) 12) Maximum rated electric current: 1.5A 13) 48 port

1) Industry standard 19" horizontal rack 2) Supports both 568A and 568B installations 3) Supports 150Mbps Ethernet 4) Exceeds TIA/EIA 568 standard 5) Termination accepts 110 punch-down tools 6) With or without wiring management 7) Base: UL94V-0 label holder 8) Connector: PC UL94V-0 9) Housing: 30% G.F PBT UL94V-0 10) Phosphor-bronze alloy material with a minimum 10 micro inches ofgold-over-nickel plating 11) Insertion life: 750 cycles (minimum) 12) Maximum rated electric current: 1.5A 13) 18 port with RJ45 module tool free

1) Industry standard 19" horizontal rack 2) Supports both 568A and 568B installations 3) Supports 150Mbps Ethernet 4) Exceeds TIA/EIA 568 standard 5) Termination accepts 110 punch-down tools 6) With or without wiring management 7) Base: UL94V-0 label holder 8) Connector: PC UL94V-0 9) Housing: 30% G.F PBT UL94V-0 10) Phosphor-bronze alloy material with a minimum 10 micro inches ofgold-over-nickel plating 11) Insertion life: 750 cycles (minimum) 12) Maximum rated electric current: 1.5A 13) with 72 port tool free

1)18 port Cat 6 patch panel 2)19" standard rack design 3) Sturdy aluminum plate around RJ 45 jacks 4) Phosphor bronzewith gold plated, available with T568 A and T568 B wiring pattern and meeting the requirement of Cat 6standard; color coded TIA/EIA 568a (international) and 568b (AT&T standard) wiring for easy installation 5) Termination accepts 22, 24 and 26AWG (0.64, 0.5 and 0.4) solid wires 6) Meets or exceeds the requirement of ANSI /TIA/EIA 568B 7) Metal sheet: corrosion resistant 8) Plastic: flame resistant andhigh impact plastic

1) 24 port Cat 6 patch panel 2)19" standardrack design 3) Sturdy aluminum plate around RJ 45 jacks 4) Phosphor bronze with gold plated, available with T568 A and T568 B wiring pattern and meeting the requirement of Cat 6standard; color coded TIA/EIA 568a (international) and 568b (AT&T standard) wiring for easy installation 5) Termination accepts 22, 24 and 26AWG (0.64, 0.5 and 0.4) solid wires 6) Meets or exceeds the requirement of ANSI /TIA/EIA 568B 7) Metal sheet: corrosion resistant 8) Plastic: flame resistant andhigh impact plastic 9) 24 port colourful RJ45 module tool free

1) 48 port Cat 6 patch panel 2)19" standard rack design 3) Sturdy aluminum plate around RJ 45 jacks 4) Phosphor bronze withgold plated, available with ISO/IEC 11801 and T568 A and T568 B wiring pattern and meeting the requirement of Cat 6standard; color coded TIA/EIA 568a (international) and 568b (AT&T standard) wiring for easy installation 5) Termination accepts 22, 24 and 26AWG (0.64, 0.5 and 0.4) solid wires 6) Meets or exceeds the requirement of ANSI /TIA/EIA 568B.2 7) Metal sheet: corrosion resistant 8) Plastic:flame resistant and high impact plastic

Signal line

DESCRIPTION： Cat.5e Unshielded Keystone Jack Specifications: Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements. Meet TIA/EIA TSB-40 Meet ISO/IEC Generic Cabling Standard 11801 Meet CENELEC Generic Cabling Standard EN50173 Angle: 90 Degree Termination: 110 Type Electrical: According to UL 1863 Current rating: 1.5 Amp Max. Voltage rating: 150 Volts Contact resistance: 20 m-ohm Insulation Resistance: 500M-ohm Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min Materials: Housing: PC UL94V-0 IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire. PCB: FR4 1.6mm(0.04") thickness, 2 layers Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area.

Cat.5e Unshielded Keystone Jack Specifications: Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements. Meet TIA/EIA TSB-40 Meet ISO/IEC Generic Cabling Standard 11801 Meet CENELEC Generic Cabling Standard EN50173 Angle: 90 Degree Termination: 110 Type Electrical: According to UL 1863 Current rating: 1.5 Amp Max. Voltage rating: 150 Volts Contact resistance: 20 m-ohm Insulation Resistance: 500M-ohm Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min Materials: Housing: PC UL94V-0 IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire. PCB: FR4 1.6mm(0.04") thickness, 2 layers Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area.

Cat.5e Unshielded Keystone Jack Specifications: Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements. Meet TIA/EIA TSB-40 Meet ISO/IEC Generic Cabling Standard 11801 Meet CENELEC Generic Cabling Standard EN50173 Angle: 180 Degree Termination: 110 Type Electrical: According to UL 1863 Current rating: 1.5 Amp Max. Voltage rating: 150 Volts Contact resistance: 20 m-ohm Insulation Resistance: 500M-ohm Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min Materials: Housing: PC UL94V-0 IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire. PCB: FR4 1.6mm(0.04") thickness, 2 layers Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area.

tooless voice keystone jack Specifications: Meet TIA/EIA-568-A and TIA/EIA-568-B Category 3 requirements. Meet TIA/EIA TSB-40 Meet ISO/IEC Generic Cabling Standard 11801 Meet CENELEC Generic Cabling Standard EN50173 Angle: 90 Degree Termination: 110 Type Electrical: According to UL 1863 Current rating: 1.5 Amp Max. Voltage rating: 150 Volts Contact resistance: 20 m-ohm Insulation Resistance: 500M-ohm Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min Materials: Housing: PC UL94V-0 IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire. PCB: FR4 1.6mm(0.04") thickness, 2 layers Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area.

voice keystone jack Specifications: Meet TIA/EIA-568-A and TIA/EIA-568-B Category 3 requirements. Meet TIA/EIA TSB-40 Meet ISO/IEC Generic Cabling Standard 11801 Meet CENELEC Generic Cabling Standard EN50173 Angle: 90 Degree Termination: 110 Type Electrical: According to UL 1863 Current rating: 1.5 Amp Max. Voltage rating: 150 Volts Contact resistance: 20 m-ohm Insulation Resistance: 500M-ohm Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min Materials: Housing: PC UL94V-0 IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire. PCB: FR4 1.6mm(0.04") thickness, 2 layers Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area.

Cat.3 Unshielded Keystone Jack Specifications: Meet TIA/EIA-568-A and TIA/EIA-568-B Category 3 requirements. Meet TIA/EIA TSB-40 Meet ISO/IEC Generic Cabling Standard 11801 Meet CENELEC Generic Cabling Standard EN50173 Angle: 90 Degree Termination: 110 Type Electrical: According to UL 1863 Current rating: 1.5 Amp Max. Voltage rating: 150 Volts Contact resistance: 20 m-ohm Insulation Resistance: 500M-ohm Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min Materials: Housing: PC UL94V-0 IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire. PCB: FR4 1.6mm(0.04") thickness, 2 layers Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area.

Cat.6 Unshielded Keystone Jack Specifications: Meet TIA/EIA-568-A and TIA/EIA-568-B Category 6 requirements. Meet TIA/EIA TSB-40 Meet ISO/IEC Generic Cabling Standard 11801 Meet CENELEC Generic Cabling Standard EN50173 Angle: 180 Degree Termination: Krone Type Electrical: According to UL 1863 Current rating: 1.5 Amp Max. Voltage rating: 150 Volts Contact resistance: 20 m-ohm Insulation Resistance: 500M-ohm Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min Materials: Housing: PC UL94V-0 IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire. PCB: FR4 1.6mm(0.04") thickness, 2 layers Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area.

1)used in big bay and partition situation, the voice port and data port can be installed onto desktop, convenint for user. 2) The outlet appearance is beautiful and adopts dustproof structure. 3) Size. H58*W62*D30mm

1) The desktop outlet is used in big bay and partition situation, the voice port and data port can be installed onto desktop to be convenient for user. 2) Its appearance is beautiful and adopts dustproof structure. 3) Size. H58*W62*D30mm

1) Installed at the entrance of residential subscriber to provide physical connection for each broadband service, there have many wiring and structure forms to provide data and telephone interfaces. Material use flaming-proof PC. 2) Can be custom make. 3) Size. H86*W86*D38mm

It is a conversion outlet designed for access network at home, its functions is to convert one incoming UTP cable into one RJ45 data interface and one RJ11 voice interface (which are connected with one computer and one telephone respectively) through this outlet, and continuees connecting with next compound type multimedia information box.

1)The module contain two piece contacts normally closed. 2) Internal diameter of wire: 0.4mm-0.65mm. 3) Plastic Parts: PBT-V0 UL94 or ABS. 4) Contacts Pin: 0.5mm Phosphor bronze with silver-plated 5) Silver-plated: 30U or client request.

1)Superior high speed data and voice cross connect module 2)Internal diameter of wire: 0.4mm-0.65mm 3)CAT5 module, with colour sign. 4)Plastic Parts: PBT-V0 UL94 or ABS 5)Contacts Pin: 0.5mm Thickness Silver-plated Bronze 6)Contacts Pin: 0.5mm Thickness Silver-plated Bronze

1)25 Pair Straight Splicing Module 2)Plastic Parts: PC-V0 UL94. 3)Contacts Pin: Copper

The module is applicable to technical and commercial superior cross connection system and it is designed for universal application. This module has different pairs such as 5, 10, 20, 25, and 100 pairs Plastic Parts: ABS-V0 UL94.

1) The module is applicable to technical and commercial superior cross connection system and it is designed for universal application 2) This module has different pairs such as 5, 10, 20, 25, and 100 pairs.

Conductor Diameter: 0.4-1.2m. Overall insulation diameter: 0.5mm max . Plastic Parts: Polycarbonate. Contact Pin: Phosphor Bronze of Silver-Plated Subscriber Terminal Block Without Protection

Conductor Diameter: 0.4-1.2m. Overall insulation diameter: 0.5mm max Mounted excharge tube inside for protecion. Plastic Parts: Polycarbonate Contact Pin: Phosphor Bronze of Silver-Plated Subscriber Terminal Block With Protection

110 wiring Block With label holder. 50 pair with leg or without leg 100 pair with leg or without leg

Fiber Optic Patch cord Product type SM MM UPC APC PC PC Insert loss ≤0.2dB ≤0.3dB ≤0.3dB ≤0.3dB Temperature range -40℃～80℃ -40℃～80℃ -40℃～80℃ -40℃～80℃ Repeatability ≤0.1dB ≤0.1dB ≤0.1dB ≤0.1dB Return loss ≥50dB ≥60dB ≥50dB Pulling force ≥98N ≥98N ≥98N ≥98N Radius:10-25mm(for PC/UPC), 5-15mm(for APC) Apex: ≤50um Fiber Height: -50nm～+50nm Need more Fiber Optic Patch cord please contact us.

Fiber Optic Patch cord Product type SM MM UPC APC PC PC Insert loss ≤0.2dB ≤0.3dB ≤0.3dB ≤0.3dB Temperature range -40℃～80℃ -40℃～80℃ -40℃～80℃ -40℃～80℃ Repeatability ≤0.1dB ≤0.1dB ≤0.1dB ≤0.1dB Return loss ≥50dB ≥60dB ≥50dB Pulling force ≥98N ≥98N ≥98N ≥98N Radius:7-15mm Apex: ≤50um Fiber Height: -50nm～+50nm Need more information, please contact us.

Product type SM MM UPC APC PC PC Insertion loss ≤0.2dB ≤0.3dB ≤0.3dB ≤0.3dB Temperature range -40℃～80℃ -40℃～80℃ -40℃～80℃ -40℃～80℃ Repeatability ≤0.1dB ≤0.1dB ≤0.1dB ≤0.1dB Return loss ≥50dB ≥60dB ≥50dB Pulling force ≥98N ≥98N ≥98N ≥98N Radius:10-25mm(for PC/UPC), 5-15mm(for APC) Apex: ≤50um Fiber Height: -50nm～+50nm Need more information, please contact us.

Product type SM MM UPC PC PC Insert loss ≤0.2dB ≤0.3dB ≤0.3dB Temperature range -40℃～80℃ -40℃～80℃ -40℃～80℃ Repeatability ≤0.1dB ≤0.1dB ≤0.1dB Return loss ≥50dB ≥50dB 　 Pulling force ≥98N ≥98N ≥98N Radius:10-25mm(for PC/UPC) Apex: ≤50um Fiber Height: -50nm～+50nm

Product type SM MM UPC PC PC Insert loss ≤0.2dB ≤0.3dB ≤0.3dB Temperature range -40℃～80℃ -40℃～80℃ -40℃～80℃ Repeatability ≤0.1dB ≤0.1dB ≤0.1dB Return loss ≥50dB ≥50dB 　 Pulling force ≥98N ≥98N ≥98N Radius:7-15mm Apex: ≤50um Fiber Height: -50nm～+50nm Need more information, please contact us.

Product type SM MM PC PC Insert loss ≤0.3dB ≤0.3dB Temperature range -40℃～80℃ -40℃～80℃ Repeatability ≤0.1dB ≤0.1dB Return loss ≥50dB 　 Need more information, please contact us.

Parameter for cable: Out-diameter Weight Tensile Force(Max.) Short Term Long Term 3.0MM 15KG/KM 200N 100N Press Force Temperature Range Bending Radius Installation Working 1000N/100MM -20℃～+60℃ 50mm 30mm Loss: SM MM 1310nm 1550nm 850nm 1300nm ≤0.36dB/KM ≤0.22dB/KM ≤3.5dB/KM ≤1.5dB/KM Need more information, please contact us.

Mechanical Parameter Out-diameter(mm) Weight (kg/km) Tensile Force(Max.)(N) Bending Radius(mm) Short Term Long Term Installation Working 3 7 150 80 50 30 Store Temperature(℃) -40～+70 Working Temperature(℃) -20～+70 Transfer Parameter Working Wavelength 850/1300nm 1310/1550nm Optic fiber type MM G.652 G.655 Core/Cladding diameter 50/125um 62.5/125um / / Loss(dB/km) ≤3.0/1.0 ≤3.5/1.5 ≤0.4/0.25 ≤-/0.5 Bandwidth(MHz·km) ≥200/400 ≥160/200 / / Need more information, please contact us.

Mechanical Parameter Out-diameter(mm) Weight (kg/km) Tensile Force(Max.)(N) Bending Radius(mm) Short Term Long Term Installation Working 2 7 150 80 50 30 Store Temperature(℃) -40～+70 Working Temperature(℃) -20～+70 Transfer Parameter Working Wavelength 850/1300nm 1310/1550nm Optic fiber type MM G.652 G.655 Core/Cladding diameter 50/125um 62.5/125um / / Loss(dB/km) ≤3.0/1.0 ≤3.5/1.5 ≤0.4/0.25 ≤-/0.5 Bandwidth(MHz·km) ≥200/400 ≥160/200 / / Need more information, please contact us.

Mechanical Parameter Out-diameter(mm) Core number Weight (kg/km) Tensile Force(Max.)(N) Bending Radius(mm) Short Term Long Term Installation Working 6-20 2core-48core 65-250 660-2500 440-1320 20*Diameter 10*Diameter Store Temperature(℃) -40～+70 Working Temperature(℃) -20～+70 Transfer Parameter Working Wavelength 850/1300nm 1310/1550nm Optic fiber type MM G.652 G.655 Core/Cladding diameter 50/125um 62.5/125um / / Loss(dB/km) ≤3.0/1.0 ≤3.5/1.5 ≤0.4/0.25 ≤-/0.5 Bandwidth(MHz·km) ≥200/400 ≥160/200 / / Need more information, please contact us.

Mechanical Parameter Out-diameter(mm) Core number Weight (kg/km) Tensile Force(Max.)(N) Bending Radius(mm) Short Term Long Term Installation Working 6-20 2core-144core 5-250 660-2500 440-1320 20*Diameter 10*Diameter Store Temperature(℃) -40～+70 Working Temperature(℃) -20～+70 Transfer Parameter Working Wavelength 850/1300nm 1310/1550nm Optic fiber type MM G.652 G.655 Core/Cladding diameter 50/125um 62.5/125um / / Loss(dB/km) ≤3.0/1.0 ≤3.5/1.5 ≤0.4/0.25 ≤-/0.5 Bandwidth(MHz·km) ≥200/400 ≥160/200 / /

Fiber Optic Cable Mechanical Parameter Core number Weight (kg/km) Tensile Force(Max.)(N) Bending Radius(mm) Short Term Long Term Installation Working 4,6,8,12 7.5-9.9 660-1320 440-1320 20*Diameter 10*Diameter Store Temperature(℃) -40～+70 Working Temperature(℃) -20～+70 Transfer Parameter Working Wavelength 850/1300nm 1310/1550nm Optic fiber type MM G.652 G.655 Core/Cladding diameter 50/125um 62.5/125um / / Loss(dB/km) ≤3.0/1.0 ≤3.5/1.5 ≤0.4/0.25 ≤-/0.5 Bandwidth(MHz·km) ≥200/400 ≥160/200 / /

Mechanical Parameter Out-diameter(mm) Core number Weight (kg/km) Tensile Force(Max.)(N) Bending Radius(mm) Short Term Long Term Installation Working 9.8-11.8 ≤6 80-110 1000 300 20*Diameter 10*Diameter Store Temperature(℃) -40～+70 Working Temperature(℃) -20～+70 Transfer Parameter Working Wavelength 850/1300nm 1310/1550nm Optic fiber type MM G.652 G.655 Core/Cladding diameter 50/125um 62.5/125um / / Loss(dB/km) ≤3.0/1.0 ≤3.5/1.5 ≤0.4/0.25 ≤-/0.5 Bandwidth(MHz·km) ≥200/400 ≥160/200 / /

model capacity(Cores) dimension(cm) GP69-12 12 320x144x42 GP69-24 24 320x144x42 GP69-36 36 320x144x62 GP69-48 48 320x144x62 Need more information, please contact us.

Insertion loss: ≤0.2dB Keeping force: 2～6N Repeatable: ≤0.1dB Temperature range: -40℃～+80℃ Changeability:≤0.2Db Need more information, please contact us.

Insertion loss: ≤0.2dB Keeping force: 2～6N Repeatable: ≤0.1dB Temperature range: -40℃～+80℃ Changeability:≤0.2Db

Insertion loss: ≤0.2dB Keeping force: 2～6N Repeatable: ≤0.1dB Temperature range: -40℃～+80℃ Changeability:≤0.2dB

Insertion loss: ≤0.2dB Keeping force: 2～6N Repeatable: ≤0.1dB Temperature range: -40℃～+80℃ Changeability:≤0.2Db

Insertion loss: ≤0.2dB Keeping force: 2～6N Repeatable: ≤0.1dB Temperature range: -40℃～+80℃ Changeability: ≤0.2Db

Insertion loss: ≤0.2dB Keeping force: 2～6N Repeatable: ≤0.1dB Temperature range: -40℃～+80℃ Changeability:≤0.2Db

Need more information, please contact us.

1)Suitable for 19” rack/cabinet 2) Can be installed flush and in 1”.2”,5” indent manner. 3) There are five kinds of rack for choice. Rack capacity(cores) Dimension(mm) HxWxD 12 52x487x720 24 80x487x260 48 136x487x260 72 195x487x260 96 265x487x260 Need more information, please contact us.

1)Suitable for 19” rack/cabinet 2) There aretwo kinds of racks for choice. Rack capacity(cores) Dimension(mm) HxWxD 48 75x483x260 144 222x483x260 Need more information, please contact us.

1)Suitable for 19” rack/cabinet 2) There are three kinds of racks for choice. Rack capacity(cores) Dimension(mm) HxWxD 24 134x483x260 48 222x483x260 72 366x483x260 Need more information, please contact us.

1)Suitable for 19” rack/cabinet 2)Dimension(mm):160x483x130

GXF5-67 fiber optic cross connection cabinet is an outdoor fiber optic distribution equipment designed specifically for fiber opticl fiber connection point within fiber optic access network which is located outdoor, it can achieve such functions such as spiling,terminal,storage,and dispatch direct loop of fiber optic cable. Model Installation mode Dimension(mm) Capacity(cores) Remark Height Width Depth GXF5-67 Wall mounting 700 480 300 48,72,96,144 SMC cabinet Built on stilts 1100 750 300 216,288 Floor type 1450 750 300 Need more information, please contact us.

1)19” standard cabinet, high density cabinet, all-in-one cassette is used, fiber optic passing-by splicing box is optional. 2)Total enclosed structure, glass font door 3) Adopts all-in-one cassettes, easy for capacity expanding. 4) High density design to save room, lighten weight. 5) Unique fiber optic passing-by splicing box is for customer’s choice Cabinet dimension(mm) HXWXD Capacity(cores) 2600X860X300 720 2600X860X300 576 2600X860X300 432 Need more information, please contact us.

1)19” standard cabinet, can be arbitrarily extended in parallel, Patchcords at the loop route can be achieved within united cabinets, there are special slots for patchcords. 2)Specified positions for inlet and outlet of fiber optic cable , patchcords and pigtails ,independent and non-interfere each other, convenient capacity expanding 3)Terminal module adopt base plate for 6pcs adapters, assembling and disassembling of base plate need no tools. Operation of the adapters is simple and convenient ,and management is reasonable. 4)Use sloping fixation of adapter and avoid direction irradiation of laser when operating. 5)Total enclosed structure, fully front operation, can be installed back to back, save equipment room, beautiful whole appearance and high reliability , a preferred model for new equipment room. Cabinet dimension(mm) HXWXD Capacity(cores) Bunchy fiber optic ribbon fiber optic 2600X860X300 432 576 2600X860X300 360 432 2600X860X300 288 384 Need more information, please contact us.

Feature: Splicing ,wound storages an distribution functions of optical fiber cable are integrated together , The splicing board of optical fiber can be operated outside the cabinet, easy for use and convenient for capacity expanding; The installation board of adapter is blocked by plastic clasp, free for plug and draw, convenient for installation, adapters (Such as FC,ST and SC etc.)can be selected Suitable for optical fiber cable with fewer cores, preferred equipment for access port of network distribution in sub-zone Technical parameters Ambient temperature: -25 ~ +40°C Relative humidity<=85% (at +30°C) Atmospheric pressure:70KPa~106KPa Operating wavelength:850nm,1310nm,1550nm Return loss: PC>=40dB UPC>=50dB APC>=60dB Plug-draw durability life:>1000 times Insulation resistance:>1000M Ohm/500V (DC) Dielectric strength:>3000V(DC)/1min,no spark-over, no flying arc MODEL Dimension (mm) HXWXD Max capacity(cores) Remark GXF6-22 329x244x48 6 Metal box GXF6-22A 329x378x48 12 GXF6-22B 329x378x82 24 GXF6-22C 329x378x152 48 GXF6-23C 350x378x220 72 Need more information, please contact us.

This product is widely used in the city and country cable network,the data and graph transfer system , the CATV wired TV series, the direct and branch connection of the Indoor cable , which acts as pigtail　storage and connector protection.It is made of coldrolled steel sheets by electrostatic plastic spraying,and has proper structure and neatly-looking . We can fix the cable by strengthening core in the terminal box, and its ports can be replaced according to the practical enginee-ring requirements .The panel of this product , on which adapter is installed can be replaced optionally by FC,SC,ST,LC……,and it is also suitable for both ribbon optical fiber cable and common optical fiber cable . Need more information, please contact us.

integrates splicing, storage and distribution of fiber cable together. the splicing tray of optical fiber can be operated outside yhe cabinet, easy for use and convenient for capacity expanding. The installation board of adapter is locked by plastic clamp, free of plug nd draw, FC,ST, ST can be selected. Suitable for fiber optical cable with fewer cores , the prefered equipment for access port of network distribution in sub-zone. Need more information, please contact us.

Parameter for connectors Parameter Technical Specification Geometrical parameters of polished ferrules Curvature radius(mm) 10-25(for 2.5mm PC connectors) 5-12(for 1.25 mm and 2.5mm APC connectors) 7-25(for 1.25 PC connector) Apex offset(um) ≤50 Fiber (nm) ±50nm Cable retention(N) ≥100 Return loss (dB) (At 1310 &1550nm) ≥50(PC) ≥60(APC) Insertion loss(dB) (At 1310 &1550nm) ≤0.2 Temperature range(℃) -40～+80 Mechanical durability(Times) ≥1000

Parameter for connectors Insertion loss(dB) (At 1310 & 1550nm) ≤0.2 Temperature range(℃) -40～+80 Mechanical durability(Times) ≥1000

Key features and benefits Low excess loss, good sectral uniformity and PDL Excellent machanical and enviromental performances

Specification for Connectors SM Connector MM connector Polishing mode UPC APC Insert Loss(dB) ≤0.2dB ≤0.2dB ≤0.3dB Return loss(dB) ≥50dB ≥60dB N/A Working temp(0C) －40°C~+80 Repeatable(Mates) ≥1000